User's Manual

Back to Contents Page
 Computer Cover
Dell Studio One 19/1909 Service Manual
Removing the Computer Cover
Replacing the Computer Cover



Removing the Computer Cover

1. Follow the procedures in Before You Begin.


2. Place the computer face down on a flat surface.

3. Starting at the groove at the bottom of the computer cover, use your fingers to separate the computer cover from the computer by lifting the insides of
the computer cover.

4. Work around the computer cover and gently ease the computer cover away from the computer.

5. Lift the computer cover away from the computer and place it aside in a secure location.
Replacing the Computer Cover

1. Follow the procedures in Before You Begin.

2. Position the computer cover over the computer.

3. Gently ease the pins into the holes on the shield.

4. Press down and push the computer cover along the edges until it snaps into place.

5. Connect your computer and all attached devices to electrical outlets, and turn them on.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
CAUTION: Ensure that sufficient space exists to support the system with the computer cover removed—at least 30 cm (1 ft.) of desk top space.
CAUTION: Before opening your computer, ensure that you place the computer on a soft cloth or clean surface to avoid any scratches on the
display.
1
computer cover
2
groove