User's Manual
Table Of Contents
- Contents
- CAUTION: Safety Instructions
- When Using Your Computer
- A Tour of Your Computer
- Setting Up Your Computer
- Using a Battery
- Using the Keyboard and Touch Pad
- Using CDs, DVDs, and Other Multimedia
- Setting Up a Home and Office Network
- Solving Problems
- Finding Solutions
- Accessing Help
- Error Messages
- Video and Display Problems
- Scanner Problems
- Drive Problems
- PC Card Problems
- General Program Problems
- Resolving Other Technical Problems
- If Your Computer Gets Wet
- If You Drop or Damage Your Computer
- Drivers
- Resolving Software and Hardware Incompatibilities
- Using System Restore
- Reinstalling Microsoft® Windows® XP
- Adding and Replacing Parts
- Appendix
- Index
102 Adding and Replacing Parts
www.dell.com | support.dell.com
5 Replace the cover.
NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it.
Forcing the cover to close may damage your computer.
6
Insert the battery into the battery bay, or connect the AC adapter to your computer
and an electrical outlet.
7 Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the
system configuration information.
To confirm the amount of memory installed in the computer, click the Start button, click
Help and Support, and then click Computer Information.
Modem and Mini PCI Card
1 Complete the instructions in "Before You Add or Replace Parts" on page 100.
2 Turn the computer over, loosen the captive screw on the modem/Mini PCI card cover,
and lift the cover away from the computer.