User's Manual
Table Of Contents
- Contents
- CAUTION: Safety Instructions
- When Using Your Computer
- A Tour of Your Computer
- Setting Up Your Computer
- Using a Battery
- Using the Keyboard and Touch Pad
- Using CDs, DVDs, and Other Multimedia
- Setting Up a Home and Office Network
- Solving Problems
- Finding Solutions
- Accessing Help
- Error Messages
- Video and Display Problems
- Scanner Problems
- Drive Problems
- PC Card Problems
- General Program Problems
- Resolving Other Technical Problems
- If Your Computer Gets Wet
- If You Drop or Damage Your Computer
- Drivers
- Resolving Software and Hardware Incompatibilities
- Using System Restore
- Reinstalling Microsoft® Windows® XP
- Adding and Replacing Parts
- Appendix
- Index
106 Adding and Replacing Parts
www.dell.com | support.dell.com
2 Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini
PCI card into the connector until it clicks.
3 Connect the antenna cables to the Mini PCI card.
4 Replace the cover and tighten the screw.
Hard Drive
CAUTION: If you remove the hard drive from the computer when the drive is hot,
do not touch
the metal housing of the hard drive.
NOTICE: To prevent data loss, shut down your computer (see page 40) before removing the
hard drive. Do not remove the hard drive while the computer is on, in standby mode, or in
hibernate mode.
NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive.
NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources
other than Dell.
NOTE: You need the
Operating System
CD to install the Microsoft
®
Windows
®
operating
system. You also need the
Drivers and Utilities
CD for your computer to install the drivers and
utilities on the new hard drive.
Mini PCI card
Mini PCI card connector
antenna cables