User's Manual
Table Of Contents
- Contents
- CAUTION: Safety Instructions
- When Using Your Computer
- A Tour of Your Computer
- Setting Up Your Computer
- Using a Battery
- Using the Keyboard and Touch Pad
- Using CDs, DVDs, and Other Multimedia
- Setting Up a Home and Office Network
- Solving Problems
- Finding Solutions
- Accessing Help
- Error Messages
- Video and Display Problems
- Scanner Problems
- Drive Problems
- PC Card Problems
- General Program Problems
- Resolving Other Technical Problems
- If Your Computer Gets Wet
- If You Drop or Damage Your Computer
- Drivers
- Resolving Software and Hardware Incompatibilities
- Using System Restore
- Reinstalling Microsoft® Windows® XP
- Adding and Replacing Parts
- Appendix
- Index
62 Using CDs, DVDs, and Other Multimedia
www.dell.com | support.dell.com
3 Plug one end of the composite video cable into the composite video connector on the
composite TV-out adapter cable.
4 Plug the other end of the composite video cable into the composite video connector
on the television.
5 Plug the single-connector end of the audio cable into the headphone connector on the
computer.
6 Plug the two RCA connectors on the other end of the audio cable into the audio input
connectors on your television or other audio device.
Enabling the Display Settings for a Television
ATI Video Controller
NOTE: Ensure that you properly connect the television before you enable the display settings.
1 Click the Start button and click the Control Panel icon.
2 Click Appearance and Themes and click Display.
3 Click the Settings tab and click Advanced.