User's Manual

Installing the Power Supply Unit (PSU) Card

1. Install the screws that secure the PSU card to the chassis.

2. Connect all the cables to the PSU card.

3. Install the right cover.

4. Follow the procedures in

After Working Inside Your Computer

Removing the System Board

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the:

a) left cover

b) optical drive

c) air tunnel

d) heat sink

e) system fan

f) front cover

g) hard drive

h) chassis intrusion switch

i) coin-cell battery

j) memory module (s)

k) processor

3. Disconnect all the connectors from the system board.