Instruction Manual

12 │ Checking the Battery
Checking Battery Health
Battery health is a measurement reflecting the general condition of the
battery. It indicates how much battery life remains before the power
companion must be replaced.
NOTE: The units of SOH (State Of Health) are percentage (%) points.
A battery’s SOH is 100% at the time of manufacture and will deteriorate
gradually with usage.
Press and hold the power button for 5 seconds to turn on the power
companion and check the battery health status.
Battery-Status Light Battery Health Status
5
th
battery-status light is on
81% – 100%
4
th
& 5
th
battery-status lights are on
61% – 80%
3
rd
~5
th
battery-status lights are on
41% – 60%
2
nd
~5
th
battery-status lights are on
21% – 40%
All 5 battery-status lights are on
1% – 20%
Error Status
The type of error condition table is shown below.
Event Battery-Status Light Color & Behavior Status
All modes One second flash ON/OFF interchangably
on the 1
st
battery-status light (amber) and
2
nd
battery-status light (white)
Over temperature
PSID Fail or
Daisy Chain
Solid amber Error caused by
using the wrong
adapter.