Setup Guide

113 ןקתהה לש הרוצת תעיבקו הלעפה
ףשאה לש 2 בלש
:גצומ אבה עדימה
Now we need to setup your initial privilege (Level 15) user
account.
This account is used to login to the CLI, Telnet and Web interface.
You may setup other accounts and change privilege levels later.
For more information on setting up user accounts and changing
privilege levels,see the user documentation.
To setup a user account:
[admin]:Enter the user name<1-20>
Please enter the user password:*****
Please reenter the user password:*****
.(15 המר) תויתלחתהה האשרהה לש שמתשמה ןובשח תא רידגהל ונילע תעכ)
.טנרטניאה קשממלו CLI, Telnet -ל הסינכל שמשמ הז ןובשח
.רתוי רחואמ דעומב האשרה תומר תונשלו םירחא תונובשח רידגהל ךתורשפאב
.שמתשמל דועיתב ןייע ,האשרה תומר יונישו םישמתשמ תונובשח תרדגה לע ףסונ עדימ תלבקל
:שמתשמ ןובשח רידגהל ידכ
[admin]:<1-20> שמתשמה םש תא ןזה
*****:שמתשמה תמסיס תא ןזה
(*****:שמתשמה תמסיס תא בוש ןזה
ףשאה לש 3 בלש
:גצומ אבה עדימה
Next, an IP address is setup.
The IP address is defined on the default VLAN,(VLAN #2). This
is the IP address you use to access the Telnet, Web interface,
or SNMP interface for the switch. To setup an IP address:
10.6.22.100:Please enter the IP address of the device (A.B.C.D)
[255.255.255.224]:Please enter the IP subnet mask (A.B.C.D or nn)