Setup Guide
182
启动和配置设备
“安装向导”配置了以下字段。
•SNMP
团体字符串和
SNMP
管理系统
IP
地址 (可选)
•
用户名和密码
•
设备
IP
地址
•IP
子网掩码
•
默认网关
IP
地址
安装向导显示以下信息:
Welcome to Dell Easy Setup Wizard.
The Setup Wizard guides you through the initial switch configuration,
and gets you up and running as quickly as possible. You can skip the
setup wizard, and enter CLI mode to manually configure the switch. The
system will prompt you with a default answer; by pressing enter, you
accept the default. You must respond to the next question to run the
setup wizard within 60 seconds, otherwise the system will continue
with normal operation using the default system configuration.
Would you like to enter the setup wizard (you must answer this
question within 60 seconds)? (Y/N)[Y] Y
( 欢迎使用 Dell 轻松安装向导。
安装向导会指导您完成交换机初始配置,并且尽快启动并运行。也可跳过安装向导,然后进入
CLI 模式以手动配置交换机。系统会提示用户使用默认配置,按 Enter 键接受默认配置。
必须在 60 秒之内回应下一个问题以运行安装向导,否则系统会继续使用默认的系统配置执
行正常操作。
是否进入安装向导 (必须在 60 秒之内回答此问题)? (Y/N)[Y] Y)
如果选择不使用安装向导,也可使用默认 IP 地址 / 掩码 (192.168.2.1/255.255.255.0) 访问 Web 接口。
可随时输入 [Ctrl+Z] 退出安装向导。
向导步骤 1
将显示以下信息:
The system is not setup for SNMP management by default.
To manage the switch using SNMP (required for Dell Network Manager)
you can:
*Setup the initial SNMP Version 2 account now
*Return later and setup additional SNMP v1/v2 accounts
For more information on setting up SNMP accounts, please see the user
documentation.
Would you like to setup the SNMP management interface now? (Y/N)[Y] Y