Setup Guide
启动和配置设备
185
( 最后设置默认网关。
请输入此网络可访问的网关的 IP 地址 (例如 192.168.1.1)。默认网关 (A.B.C.D):
[10.6.22.97]
输入默认网关。
按 Enter 键。将显示以下信息 (按照所述的示例参数):
This is the configuration information that has been collected:
( 这是已收集到的配置信息:)
==============================================================
SNMP Interface = Dell_Network_Manager@0.0.0.0
User Account setup = admin
Password = **********
Management IP address = 10.6.22.100 255.255.255.224
Default Gateway is 10.6.22.97
(SNMP 接口 = Dell_Network_Manager@0.0.0.0
用户帐户设置 = admin
密码 = **********
管理 IP 地址 = 10.6.22.100 255.255.255.224
默认网关为 10.6.22.97)
==============================================================
向导步骤 5
将显示以下信息:
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file. If the
information is incorrect,select (N) to discard configuration and
restart the wizard: (Y/N)[Y] Y
Configuring SNMP management interface.
Configuring user account.......
Configuring IP and subnet......
Thank you for using Dell Easy Setup Wizard.
( 如果信息正确,请选择 (Y) 以保存配置,然后将其复制到启动配置文件。如果信息不正
确,则选择 (N) 以放弃配置,然后重新启动向导:(Y/N)[Y] Y
正在配置 SNMP 管理接口。
正在配置用户帐户 .......
正在配置 IP 和子网 ......
感谢您使用 Dell 轻松安装向导。 )