Setup Guide

228 σόΠεͷىಈΑͼઃఆ
To add a management station: ʢ؅ཧεςʔγϣϯΛ௥ՃΔʹ͸ ɿ ʣ
Please enter the SNMP community string to be used: ʢ࢖༻Δ SNMP ίϛϡχςΟ จ
ࣈྻ Λೖྗɻʣ
[Dell_Network_Manager]
Please enter the IP address of the Management System (A.B.C.D) or wildcard(0.0.0.0) to
manage from any Management Station:[0.0.0.0]
ʢ؅ཧγεςϜͷ IP ΞυϨεʢ A.B.C.D ʣΛೖྗ
ɻ·͸ɺ ೚ ҙͷ؅ཧεςʔγϣϯ [0.0.0.0] Β؅ཧΔ৔߹͸ϫΠϧυΧʔυʢ 0.0.0.0 ʣΛ
ೖྗɻʣ
΢Οβʔυ 2
࣍ͷ৘ใදࣔΕ·ɻ
Now we need to setup your initial privilege ʢ Level 15 ʣ user account. ʢظ ݖ ݶ
ʢϨ ϕ ϧ
15 ʣͷϢʔβʔΞΧ΢ϯτΛઃఆΔඞཁΓ·ɻʣ
This account is used to login to the CLI, Telnet and Web interface. ʢͷΞΧ
΢ϯτ͸ɺ CLI ɺ Telnet  Αͼ΢ΣϒΠϯλϑΣʔεͷϩάΠϯʹ࢖༻Ε·ɻʣ
You may setup other accounts and change privilege levels later. ʢޙͰଞͷΞΧ
΢ϯτͷઃఆ  Αͼ ݖ ݶϨ ϕ ϧͷม ߋ Ͱ·ɻʣ
For more information on setting up user accounts and changing privilege
levels, see the user documentation.
ʢϢʔβʔΞΧ΢ϯτͷઃఆ  Αͼ ݖ ݶϨ ϕ ϧͷม ߋ
ʹؔΔৄࡉ͸ϢʔβʔϚχϡΞϧΛࢀরɻʣ
To setup a user account: ʢϢʔβʔΞΧ΢ϯτΛઃఆΔʹ͸ ɿ ʣ
Enter the user name<1-20>:[admin] ʢϢʔβʔ ໊ Λೖྗ <1-20>:[admin] ʣ
Please enter the user password:***** ʢϢʔβʔύεϫʔυΛೖྗ ɿ ***** ʣ
Please reenter the user password:***** ʢϢʔβʔύεϫʔυΛ ࠶ ೖྗ
 ɿ
***** ʣ
΢Οβʔυ 3
࣍ͷ৘ใදࣔΕ·ɻ
Next ɺ an IP address is setup. ʢ࣍ʹ IP ΞυϨεΛઃఆ·ɻʣ
The IP address is defined on the default VLAN,(VLAN #2). This is the IP
address you use to access the Telnet, Web interface, or SNMP interface for
the switch.To setup an IP address:
ʢ IP ΞυϨε͸σϑΥϧτͷ VLAN ɺʢ VLAN #2 ʣʹఆ ٛ Ε·ɻΕ͸ɺεΠονͷ
Telnet
ɺ Web ΠϯλϑΣʔεɺ·͸ SNMP ΠϯλϑΣʔε΁ͷΞΫηεʹ࢖༻Δ IP ΞυϨε
Ͱɻ
IP ΞυϨεΛઃఆΔʹ͸ɺ࣍ͷ߲ ໨ Λೖྗ·ɻʣ
Please enter the IP address of the device (A.B.C.D):10.6.22.100 ʢσόΠεͷ IP
ΞυϨεΛೖྗʢ A.B.C.D ʣ :10.6.22.100 ʣ
Please enter the IP subnet mask (A.B.C.D or nn):[255.255.255.224] ʢ IP αϒωο
τϚεΫΛೖྗʢ
A.B.C.D ·͸ nn ʣ :[255.255.255.224] ʣ