Setup Guide

ΟΨͼΑܳ൲୭೰ 151
;ͻΎȜΡ 3
ˁǽษǛ⒙ᰳǤțȍǨƹ
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is
the IP address you use to access the CLI, Web interface, or SNMP
interface for the switch.
To setup an IP address:
Please enter the IP address of the device (A.B.C.D):
Please enter the IP subnet mask (A.B.C.D or /nn):
IP ȪɑɴɁǷ IP ȽɞɕɋɐɦɁȷȡӱמǦȍǨƹǮǷǗǿƸ 192.168.1.100 ȡ IP ȪɑɴɁƸ
255.255.255.0 ȡ IP ȽɞɕɋɐɦɁȷǷǦǵӱמǦȍǨƹ
Enter ȡྍǦȍǨƹ
;ͻΎȜΡ 4
ˁǽษǛ⒙ᰳǤțȍǨƹ
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable (e.g. 192.168.1.1):
ɏɝȱɳɐȺʀɐȮȯȬȡӱמǦȍǨƹ
Enter ȡྍǦȍǨƹˁǽɩɋɃʀɀǛ⒙ᰳǤțȍǨ⾷όǷǦǵπȞțǵǓȚəɱɩʀɇǺȗȚ⾸ƹ
This is the configuration information that has been collected:
SNMP Interface = "Dell Network Manager"@192.168.1.10
User Account setup = admin
Password = **********
Management IP address = 192.168.1.100 255.255.255.0
Default Gateway = 192.168.1.1