Setup Guide

40 ࡼ䜡㕂䆒໛
ሶࡴݛᒾ
3
㋏㒳ᇚᰒ⼎ҹϟֵᙃ˖
Next, an IP address is setup. The IP address is defined on the default
VLAN (VLAN #1), of which all ports are members. This is the IP
address you use to access the CLI, Web interface, or SNMP interface
for the switch.
˄᥹ϟᴹˈ䆒㕂
IP
ഄഔDŽ೼咬䅸ⱘ
VLAN [VLAN #1]
ϞᅮН
IP
ഄഔˈ݊Ёⱘ᠔᳝ッষഛᰃ៤DŽᇍѢѸᤶᴎˈ䖭ᰃ⫼Ѣ䆓䯂
CLI
⬠䴶ǃ
Web
⬠䴶៪
SNMP
⬠䴶ⱘ
IP
ഄഔDŽ˅
To setup an IP address:
˄㽕䆒㕂
IP
ഄഔ˖˅
Please enter the IP address of the device (A.B.C.D):
˄䇋䕧ܹ䆒໛ⱘ
IP
ഄഔ
[A.B.C.D]
˖˅
Please enter the IP subnet mask (A.B.C.D or /nn):
˄䇋䕧ܹ
IP
ᄤ㔥᥽ⷕ
[A.B.C.D
៪
/nn]
˖˅
䕧ܹ
IP
ഄഔ
IP
ᄤ㔥᥽ⷕˈ՟བˈ䕧ܹ
192.168.1.100
԰Ў
IP
ഄഔ
255.255.255.0
԰Ў
IP
ᄤ㔥᥽ⷕDŽ
ᣝ
Enter
䬂DŽ
ሶࡴݛᒾ
4
㋏㒳ᇚᰒ⼎ҹϟֵᙃ˖
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable(e.g. 192.168.1.1):
˄᳔ৢˈ䆒㕂咬䅸㔥݇DŽ䇋䕧ܹ䗮䖛ᅗৃ䆓䯂㔥㒰ⱘ㔥݇
IP
ഄഔ
[
՟བˈ
192.168.1.1]
˖˅
䕧ܹ咬䅸㔥݇DŽ
ᣝ
Enter
䬂DŽ㋏㒳ᇚᰒ⼎ҹϟݙᆍ˄ḍ᥂Ϟ䗄⼎՟খ᭄˅˖
This is the configuration information that has been collected:
˄ҹϟᰃᏆᬊ䲚ⱘ䜡㕂ֵᙃ˖˅
SNMP Interface = "Dell Network Manager"@192.168.1.10
˄
SNMP
⬠䴶
= "Dell Network Manager"@192.168.1.10
˅
User Account setup = admin
˄⫼᠋Ꮴ᠋䆒㕂
= admin
˅
Password = **********
˄ᆚⷕ
= **********
˅
Management IP address = 192.168.1.100 255.255.255.0
˄ㅵ⧚
IP
ഄഔ
= 192.168.1.100 255.255.255.0
˅
Default Gateway = 192.168.1.1
˄咬䅸㔥݇
= 192.168.1.1
˅