Users Guide

システム情報の設定: Dell PowerConnect 35xx システムユーザーズガイド
file:///T¦/htdocs/NETWORK/PC35xx/ja/UG/ryanugcj.htm[7/25/2012 10:19:57 AM]
111 Show All(すべてを表示)をクリックします。
Power Over Ethernet TablePower Over Ethernet 表)が開きます。
6-6. Power Over Ethernet
CLI コマンドを使用した PoE の管理
次の表は、Power Over Ethernet ページにあるフィールドを表示するための等価 CLI コマンドをまとめたものです。
CLI コマンド 説明
power inline {auto | never}
インタフェース上のインライン電力の管理モードを設定します。
power inline powered-device pd-type
パワードデバイスタイプの説明を追加します。
power inline priority {critical | high | low}
インライン電力の管理の観点からインタフェースの優先度を設定します。
power inline usage-threshold
アラームをトリガーするしきい値を設定します。
power inline traps enable
PoE デバイストラップを有効にします。
show power inline [ethernet interface]
PoE 設定情報を表示します。
以下に、PoE CLI コマンドの例を示します。
Console> enable
Console# show power inline
Unit Power Nominal Power Consumed Power Usage Threshold
1 On 370 Watts 0 Watts (0%) 95 Disable
2 Off 1 Watts 0 Watts (0%) 95 Disable
3 Off 1 Watts 0 Watts (0%) 95 Disable
4 Off 1 Watts 0 Watts (0%) 95 Disable
5 Off 1 Watts 0 Watts (0%) 95 Disable
6 Off 1 Watts 0 Watts (0%) 95 Disable
7 Off 1 Watts 0 Watts (0%) 95 Disable
8 Off 1 Watts 0 Watts (0%) 95 Disable
Port Powered Device Status Status Priority Class
1/e1 Auto Searching low class0
1/e2 Auto Searching low class0
1/e3 Auto Searching low class0
1/e4 Auto Searching low class0
1/e5 Auto Searching low class0
1/e6 Auto Searching low class0
バージョン情報の表示
Versions(バージョン)ページには、現在実行しているハードウェアおよびソフトウェアのバージョンに関する情報があります。Versions(バージョン)ページを開くには、ツ
リー表示の System(システム)® General(一般)® Versions(バージョン)をクリックします。
6-7. バージョン