Specifications

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Switch/Configuration web page.

Command
Usage
copy file {file | running-config | startup-config | tftp}
Uploads/downloads a configuration file to/from the switch's flash memory to a TFTP server
boot system {boot
-
rom| config | opcode}: filename
Specifies the file or image used to start up the system
Example

Console#copy tftp startup-config

TFTP server ip address: 10.1.0.99

Source configuration file name: startup.01

Startup configuration file name [startup]:

/

Console#
Reset
Click Reset to reboot the switch. When prompted, confirm that you want to reset the switch.

boot system {boot-rom| config | opcode}: filename
Specifies the file or image used to start up the system