Specifications


Console(config-if)#port security

Console(config-if)#
Address Table
The Address Table page includes links to the following pages:
l Static Addresses
l Dynamic Addresses
l Address Aging
Static Addresses
From the Static Addresses page, you can specify the Media Access Control (MAC) address and port number of systems that are to remain available to the
switch for an indeterminate amount of time.
The following options are available:
l Static Address Counts — Indicates the total number of static addresses configured on the switch
l Current Static Address Table — Lists all static addresses
l Interface — Allows you to select the port or trunk associated with the system you want to set as static
l MAC Address — Allows you to enter the MAC address of a system you want to set as static
l VLAN — Allows you to select the VLAN associated with the interface
To add a new address to the table, select the interface, MAC address, and VLAN, and then click Add Static Address. To delete an address from the table,
select the table entry in the list box, and then click Remove Static Address.

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Address Table/Static Addresses page.