Specifications

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Address Table/Dynamic Addresses page.

Example

Console#show mac-address-table

InterfaceMacAddressVlanType

--------- ----------------- ---- ---------------

Eth1/1100-10-b5-62-03-741Learned

Console#
Address Aging
In the Address Aging page, you can specify the length of time an address stays available to the switch if it is not configured as static.
The Aging Time option sets the time before an address is purged from the system. You can change this value to any number between 18 and 2184. (The
Command
Usage
show mac-address-table [address mac_address [mask]] [interface
interface] [vlan vlan-id] [sort {address | vlan | interface}]
Allows you to view classes of entries in the bridge-forwarding database
clear mac-address-table dynamic
Removes any learned entries from the forwarding database and clears the transmit
and receive counts for any static or system-configured entries.