Specifications

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Spanning Tree/Port Settings page.

Example

Console(config)#interface ethernet 1/5

Console(config-if)#spanning-tree port-priority 128

Console(config-if)#spanning-tree cost 19

Console(config-if)#spanning-tree link-type auto

Command
Usage
spanning-tree port-priority priority
Configures the priority for the specified interface.
Use the no form to restore the default.
spanning-tree cost cost
Configures the Spanning Tree path cost for the specified interface.
Use the no form to restore the default.
spanning-tree link-type {auto | point-to-point | shared}
Configures the link type for the Rapid Spanning Tree.
Use the no form to restore the default.
spanning-tree edge-port
Specifies an interface as an edge port.
Use the no form to restore the default.
spanning-tree protocol-migration interface
Rechecks the appropriate BPDU format to send on the selected interface.