Specifications

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Link Aggregation/Trunk Settings page.

Example

Console(config)#interface port-channel 1

Console(config-if)#exit

Console(config)#interface ethernet 1/11

Console(config-if)#channel-group 1

Console(config-if)#exit

Console(config)#interface ethernet 1/8

Console(config-if)#lacp

Console(config-if)#
Command
Usage
channel-group channel-id
Adds a port to a trunk.
Use the no form command to remove a port from a trunk.
lacp
Enables 802.3ad LACP for the current port or trunk interface.
show interfaces status port-channel channel-id
Displays the status of an enabled trunk interface.