Specifications

CLI Commands
The following tables summarize the equivalent CLI commands for items in the Multicast Support/IGMP Member Port Table page.

Example

Console(config)#ip igmp snooping vlan 1 static 224.1.2.3 ethernet 1/11

Console(config)#exit

Console#show mac-address-table multicast


VLAN M'cast IP addr. Member ports Type

---- --------------- ------------ -------

1224.1.2.3Eth1/11User

Console#
Multicast Router Port Settings
You can use the Multicast Router Port Settings page to display or set ports on the switch that are attached to a neighboring multicast router/switch for each
VLAN ID.
The following options are available:
Command
Usage
ip igmp snooping vlan vlan-id static ip-address interface
Adds a port to a multicast group
show mac-address-table multicast [vlan vlan-id] [user | igmp-snooping]
Shows the multicast list with MAC and IP addresses