Specifications

l VLAN ID — Specifies the VLAN ID
l Port/Trunk Toggle Buttons — Allows you to select ports or trunks that are attached to a neighboring multicast router/switch by toggling the value of
the port/trunk button:
¡ 'S' — Statically attaches a port or trunk to a multicast router/switch
¡ 'D' — Indicates that a port or trunk has been dynamically attached to a multicast router/switch
¡ 'BLANK' — Indicates that the port or trunk is not attached to a multicast router/switch
To save any changes you make in this page, click Apply Changes. If you don't want to save the changes, click Refresh.

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Multicast Support/Multicast Router Port Settings page.

Example

Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/5

Console(config)#exit

Console#show ip igmp snooping mrouter vlan 1

VLAN M'cast Router Port Type
Command
Usage
ip igmp snooping vlan vlan-id mrouter interface
Statically configures a multicast router port
show ip igmp snooping mrouter [vlan vlan-id]
Displays information on statically configured and dynamically learned multicast router ports