Specifications

Runtime Image Filename : run_10030

Updating file system.

File system updated.

[Press any key to continue]
12. To set the new downloaded file as the startup file, click the [S]et Startup File menu option.
13. When you have finished downloading code files, click the [C]hange Baudrate menu option to change the baud rate of the switch's serial connection
back to 9600 baud.
14. Set your computer's terminal emulation software baud rate back to 9600 baud. Press <Enter> to reset communications with the switch.
15. Press <q> to quit the firmware-download mode and boot the switch.
Technical Specifications

Getting Help
Technical Assistance
If you need help with a technical problem, Dell is ready to assist you.

1. Make a copy of the Diagnostics Checklist and fill it out.
2. Use Dell's extensive suite of online services available at Dell Support (support.dell.com) for help with installation and troubleshooting procedures.
Standards
Ethernet types supported
IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3z, IEEE 803.ab
Other standards supported
IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE
802.1w, IEEE 802.1p, IEEE 802.3ac, IEEE 802.3ad
Interfaces
10/100/1000BASE-T ports
12
SFP transceiver slots
4
RS-232 connector
1
Indicators
System LEDs
3
Port LEDs:

10/100/1000BASE-T ports
2 per port
SFP transceiver slots
1 per slot
Power
Input
100-240 VAC 50-60 Hz
Physical
Dimensions
440 x 324 x 43 mm
(17.3 x 12.8 x 1.7 inches)
Weight
4.05 kg (8.9 lb)
Environmental
Temperature:

Operating
0º to 50ºC (32º to 122ºF)
Storage
-40º to 70ºC (-40º to 158ºF)
Relative humidity:

Operating
10% to 90%
Storage
5% to 90%
CAUTION: If you need to remove the computer covers, first disconnect the computer power and modem cables from all electrical outlets.