Troubleshooting

CLI Transition guide for Dell PowerConnect 5500 Series Switches
Page 6
Updated Commands – Command Mode Modifications
Table 2 shows the list of commands with updated syntax for command mode switch operation.
Table 2. Updated Commands with Command Mode Modifications
Feature Previous Implementation
Dell PowerConnect 5500
Implementation
Comments
IGMP
Snooping
ip igmp snooping ip igmp snooping vlan
vlan-id
In Dell PowerConnect 5500,
the command was modified
from VLAN Interface
Configuration Mode command
to Global Configuration Mode
command that includes the
VLAN ID as a parameter
IGMP
Snooping
ip igmp snooping mrouter
learn-pim-dvmrp
ip igmp snooping vlan
vlan-id mrouter learn pim-
dvmrp
1. In Dell PowerConnect 5500,
the command was modified
from VLAN Interface
Configuration Mode command
to Global Configuration Mode
command that includes the
VLAN ID as a parameter
2. The command syntax was
modified
IGMP
Snooping
ip igmp snooping mrouter
ports {add | delete}
{ethernet interface-list |
port-channel port-
channel-number-list}
ip igmp snooping vlan
vlan-id mrouter interface
interface-range-list
no ip igmp snooping vlan
vlan-id mrouter interface
interface-range-list
1. In Dell PowerConnect 5500,
the command was modified
from VLAN Interface
Configuration Mode command
to Global Configuration Mode
command that includes the
VLAN ID as a parameter
2. The command syntax was
modified
IGMP
Snooping
ip igmp snooping vlan
vlan-id immediate-leave
ip igmp snooping vlan
vlan-id immediate-leave
In Dell PowerConnect 5500,
the command was modified
from VLAN Interface
Configuration Mode command
to Global Configuration Mode
command that includes the
VLAN ID as a parameter