Users Guide

Dell PowerConnect 55xx Systems User Guide 125
2 To add a recurring time range element to a time range, click Add.
3 Select the Time Range Name to which you want to add the Time Range
Recurrence. The
Absolute Start and Absolute End fields are displayed.
4 Check if the recurrence is Daily or Weekly in Recurrence type .
5 If the recurrence is Daily , enter:
–
Start Time — Select the time on which the time range starts.
–
End Time — Select the time on which the time range ends.
–
Weekday — Select the day of the week on which the time range
occurs.
6 If the recurrence is Weekly , enter:
•
Start — Select the Day of the Week and Time on which the time
range starts.
•
End —Select the Day of the Week and Time on which the time
range ends.
Configuring Time Ranges Using CLI Commands
The following table summarizes the CLI commands for configuring
time
ranges
.
Table 8-11. Time Range CLI Commands
CLI Command Description
time-range time-range-name
no time-range time-range-name
Enables time-range configuration
mode, and defines time ranges for
functions (such as access lists).
Use the no form of this command
to remove the time range
configuration.
absolute start hh:mm day month
year
no absolute start
absolute end hh:mm day month year
no absolute end
Adds start and end times to the
time range.
Use the no form of the commands
to remove the start and end times
from the time range.