Users Guide

138 Dell PowerConnect 55xx Systems User Guide
– Supplicant Timeout (1-65535) — Enter the amount of time that
lapses before EAP requests are resent to the supplicant. The field
value is in seconds.
–
Max EAP Requests (1-10) — Enter the maximum number of EAP
requests that can be sent. If a response is not received after the defined
period (supplicant timeout), the authentication process is restarted.
Enabling Port-Based Authentication on Interfaces Using the CLI Commands
The following table summarizes the CLI commands for enabling the port
based authentication as displayed in the Port Based Authentication Global
page.
Table 8-13. Port-Based Authentication Interface CLI Commands
CLI Command Description
dot1x port-control {auto |
force-authorized | force-
unauthorized}
no dot1x port-control
Enables manual control of the port
authorization state.
Use the no form of this command to
restore the default configuration.
dot1x mac-authentication
{mac-only|mac-and-802.1x}
no dot1x mac-authentication
Enables authentication based on the
station’s MAC address.
Use the no form of this command to
disable access.
dot1x radius-attributes vlan
no dot1x radius-attributes
vlan
Enables user-based VLAN assignment.
Use the no form of this command to
disable user-based VLAN assignment.
dot1x guest-vlan enable
no dot1x guest-vlan enable
Enables unauthorized users on the
interface access to the guest VLAN.
Use the no form of this command to
disable access.
dot1x max-req count
no dot1x max-req
Sets the maximum number of times that
the device sends an EAP to the client,
before restarting the authentication
process.
Use the no form of this command to
restore the default configuration.