Users Guide

194 Dell PowerConnect 55xx Systems User Guide
– Log Time — The time at which the log was entered into the RAM Log
table.
–
Severity — The log severity.
–
Description — The log entry text.
2 To remove all entries from the RAM log, click Clear Log .
Viewing and Clearing the RAM Log Table Using the CLI Commands
The following table summarizes the CLI commands for setting the size of the
RAM log buffer, viewing, and clearing entries in the RAM log.
The following is an example of the CLI commands:
Table 9-14. RAM Log Table CLI Commands
CLI Command Description
logging buffered
size
no logging buffered
Sets the number of SYSLOG messages stored in the
internal buffer (RAM).
Use the no form of this command to cancel using the
buffer.
show logging Displays the RAM logging buffer.
clear logging Clears the RAM logging buffer.
console(config)# logging buffered 300
04-Oct-2010 09:47:04 %SYSLOG-N-LOGGINGBFRSIZE: the number
of syslog messages stored in the internal buffer will be
changed to 300 (after reboot).