Users Guide

Dell PowerConnect 55xx Systems User Guide 201
Working with Remote Server Logs Using the CLI Commands
The following table summarizes the CLI command for working with remote
log servers.
The following is an example of the CLI commands:
Table 9-17. Remote Log Server CLI Commands
CLI Command Description
logging host {ipv4-address|ipv6-
address|hostname} [port port-id]
[severity level] [facility
facility] [description text]
no logging host {ipv4-
address|ipv6-address|hostname}
Logs messages to a remote server
with this IP address.
Use the no form of this command
to delete the SYSLOG server with
the specified address from the list
of SYSLOGs.
show syslog-servers Displays list of SYSLOG servers.
console (configure) # logging host 1.1.1.1
console# show syslog-servers
Device Configuration
---------------------------------------------------------
IP Address Port Facility Severity Description
----------- ----- -------- ----------- -----------
1.1.1.1 514 local7 info
1.1.1.2 514 local7 info
1.1.1.3 514 local7 info
1.1.1.4 514 local7 info