Users Guide

224 Dell PowerConnect 55xx Systems User Guide
To define an IPv6 ISATAP tunnel:
1
Click System > IP Addressing > IPv6 ISATAP Tunnel in the tree view to
display the
ISATAP Tunnel page.
Figure 9-21. IPv6 ISATAP Tunnel
2 Enter the fields:
–
ISATAP Status —Enable/disable the status of ISATAP on the device.
–
IPv4 Address Type — Enter the source of the IPv4 address used by the
tunnel. The options are:
•
Auto —Use the dynamic address.
•
None —Disable the ISATAP tunnel
•
Manual —Use the manual address assigned.
–
IPv4 Address — Enter the local (source) IPv4 address of a tunnel
interface.