Users Guide

Dell PowerConnect 55xx Systems User Guide 243
The entries in the table are displayed.
2 Enter the parameters:
•
ARP Entry Age Out (1 - 40000000) — Enter the amount of time in
seconds that can pass between ARP requests for this address. After
this period, the entry is deleted from the table.
•
Clear ARP Table Entries — Select the type of ARP entries that are
cleared on all devices. The possible options are:
•
None — ARP entries are not cleared.
•
All — All ARP entries are cleared.
•
Dynamic — Only learned ARP entries are cleared.
•
Static — Only static ARP entries are cleared.
3 To add a mapping, click Add , and enter the fields:
–
Interface — Select an interface to be associated with the addresses.
–
IP Address — Enter the station IP address, which is associated with
the MAC address filled in below.
–
MAC Address — Enter the station MAC address, which is associated
in the ARP table with the IP address.
4 To change the status of a mapping from static to dynamic or vice versa,
click
Edit and enter the field:
–
Status — Select the entry’s status. The possible options are:
•
Static — The entry was statically entered.
•
Dynamic — The entry was dynamically learned.