Users Guide

Dell PowerConnect 55xx Systems User Guide 273
– Console/Telnet/Secure Telnet Line Aging (1-365) — Check to set the
amount of time in days that elapses before a line password is aged out.
Enter the number of days after which the password expires.
–
Expiry Date — Displays the expiration date of the line password.
–
Lockout Status — Displays whether the user currently has access
(status
Usable ), or whether the user is locked out due to too many
failed authentication attempts since the user last logged in
successfully (status
Locked ).
–
Reactivate Locked Line — Check to reactivate the line password for a
Console/Telnet/Secure Telnet session. Access rights can be suspended
after a number of unsuccessful attempts to log in.
Assigning Line Passwords Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Line Password
page
.
The following is an example of the CLI commands:
Table 9-46. Line Password CLI Commands
CLI Command Description
line {console|telnet|ssh} Identifies a specific line for configuration
and enters the Line Configuration
command mode.
password password
[encrypted]
no password
Sets a password on a line.
Use the no form of this command to
remove the password.
console(config)# line console
console(config-line)# password dell