Users Guide

Dell PowerConnect 55xx Systems User Guide 275
– Expiry Date — If Aging is selected, displays the expiration date of the
enable password.
–
Lockout Status — Displays the number of failed authentication
attempts since the user last logged in successfully (if the
Enable
Login Attempts
checkbox is selected in the Password Management
page.) Specifies
LOCKOUT , when the user account is locked.
–
Reactivate Suspended User — Check to reactivate the specified user’s
access rights. Access rights can be suspended after unsuccessfully
attempting to login.
Assigning Enable Passwords Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Enable Password page.
The following is an example of the CLI commands:
TACACS+
The device can act as a Terminal Access Controller Access Control System
(TACACS+) client. TACACS+ provides centralized validation of users
accessing the device, while still retaining consistency with RADIUS and other
authentication processes.
TACACS+ provides the following services:
• Authentication — Provides authentication during login and via user
names and user-defined passwords.
•
Authorization — Performed at login after authentication. The TACACS+
server checks the privileges of the authenticated user.
Table 9-47. Enable Password CLI Commands
CLI Command Description
enable password [level
level] d [encrypted]
no enable password [level
level]
Sets a local password to control access to
user and privilege levels.
Use the no form of this command to
remove the password requirement.
console(config)# enable password level 15 secret