Users Guide

Dell PowerConnect 55xx Systems User Guide 297
address {network-number|low
low-address high high-
address} {mask|prefix-
length}
no address
Configures the subnet number, mask and
start and end addresses for a DHCP address
pool on a DHCP Server.
Use the no form of this command to remove
the subnet number and mask.
lease {days [{hours}
[minutes]]|infinite}
no lease
Configures the time duration of the lease for
an IP address that is assigned from a DHCP
server to a DHCP client.
Use the no form of this command to restore
the default value
default-router ip-address
[ip-address2 ... ip-
address8]
no default-router
Configures the default router list for a
DHCP client.
Use the no form of this command to remove
the default router list.
dns-server ip-address [ip-
address2 ... ip-address8]
no dns-server
Configures the DNS IP servers available to a
DHCP client.
Use the no form of this command to remove
the DNS server list.
domain-name domain
no domain-name
Specifies the domain name for a DHCP
client.
Use the no form of this command to remove
the domain name.
netbios-name-server ip-
address [ip-address2 ... ip-
address8]
no netbios-name-server
Configures the NetBIOS Windows Internet
Naming Service (WINS) servers that are
available to Microsoft DHCP clients.
Use the no form of this command to remove
the NetBIOS name server list.
netbios-node-type {b-node|p-
node|m-node|h-node}
no netbios-node-type
Configures the NetBIOS node type for
Mi
crosoft Dynamic Host Configuration
Protocol (DHCP) clients.
Use the no form of this command to remove
the NetBIOS node type.
Table 9-53. Network Pool CLI Commands (Continued)
CLI Command Description