Users Guide

300 Dell PowerConnect 55xx Systems User Guide
– End IP Address — Last IP address in the range of excluded IP
addresses.
Excluding Addresses Using CLI Commands
The following table summarizes the CLI commands for excluding addresses.
The following is an example of the CLI commands:
Table 9-54. Excluding Addresses Using CLI Commands
CLI Command Description
ip dhcp excluded-address low-
address [high-address]
no ip dhcp excluded-address
low-address [high-address]
Configures a DHCP address pool on a
DHCP Server and enter DHCP Pool
Configuration mode.
Use the no form of this command to
remove the address pool.
show ip dhcp excluded-addresses Displays the excluded addresses.
console(config)# ip dhcp excluded-address 172.16.1.100
172.16.1.199
console> show ip dhcp excluded-addresses
The number of excluded addresses ranges is 2
Excluded addresses:
10.1.1.212- 10.1.1.219, 10.1.2.212- 10.1.2.219