Users Guide

312 Dell PowerConnect 55xx Systems User Guide
The following is an example of the CLI commands:
SNMP Views
An SNMP view, which is a collection of MIB subtrees, provides or blocks
access to device features.
Each subtree is defined by the Object ID (OID) of the root of its subtrees. In
extreme cases this subtree can be a leaf. Well-known names can be used to
specify the root of the desired subtree, or an OID can be entered (see "Model
OIDs" on page 309).
Each subtree is either included in or excluded from the view being defined.
snmp-server trap
authentication
no snmp-server trap
authentication
Enables the router to send Simple Network
Management Protocol traps when
authentication fails.
Use the no form of this command to
disable SNMP failed authentication traps.
show snmp Checks the status of SNMP
communications.
console(config)# snmp-server enable traps
console(config)# snmp-server trap authentication
console(config)# snmp-server engineid local default
The engine-id must be unique within your administrative
domain.
Do you wish to continue? [Y/N]y
The SNMPv3 database will be erased. Do you wish to
continue? [Y/N]y
Table 9-56. SNMP Global Parameters Commands (Continued)
CLI Command Description