Users Guide

Dell PowerConnect 55xx Systems User Guide 329

Configuring SNMP Notification Recipients Using CLI Commands

The following table summarizes the CLI commands for setting fields in the

Notification Recipients pages.

The following is an example of the CLI commands:

Table 9-62. SNMP Notification CLI Commands

CLI Command Description

snmp-server host {ipv4-

address|ipv6-address|hostname}

[traps|informs] [version {1|2c|3

[auth|noauth|priv]}] community-

string [udp-port port] [filter

filtername] [timeout seconds]

[retries retries]

no snmp-server host {ipv4-

address|ipv6-address|hostname}

[traps|informs] [version {1|2c|3}]

Creates or updates a notification

recipient receiving notifications in

SNMP version 1, 2 or 3.

Use the no form of this command to

remove the specified host.

show snmp Shows the current SNMP

configuration.

console(config)# snmp-server host 172.16.1.1 private

console(config)# end

console# show snmp

Community-

String

Community-

Access

View Name IP Address

------------- ------------ --------- ----------

public read only user-view All

private read write default 172.16.1.1

private su DefaultSup

172.17.1.1