Users Guide

374 Dell PowerConnect 55xx Systems User Guide
sFlow Interface Settings
To sample datagrams or counters from a port, the port must be associated
with a receiver. sFlow port settings can be configured only after a receiver has
been defined in the sFlow Receiver Settings pages.
To enable sampling and configure the port from which to collect the sFlow
information:
1
Click System > sFlow > sFlow Interface Settings in the tree view to
display the
sFlow Interface Settings: Summary page.
Figure 9-67. sFlow Interface Settings: Summary
The sflow interface settings are displayed.
2 To associate an sFlow receiver with a port, click Add , and enter the fields:
–
Interface — Select the unit/port from which information is collected.
–
Flow Sampling — Enable/disable flow sampling. Flow sampling
cannot be disabled if
Counters Sampling is disabled.