Users Guide

422 Dell PowerConnect 55xx Systems User Guide
3 To clear the table, check Clear Table .
4 To display a subset of the addresses in a particular order, enter the query
criteria and sort key under
Query By , and click Query . The following fields
are displayed for entries matching the query criteria:
–
VLAN ID — VLAN ID in the entry.
–
MAC Address — Interface MAC address.
–
Interface — Port or LAG associated with the MAC address.
Configuring Dynamic Addresses Using CLI Commands
The following table summarizes the CLI commands for configuring static
address parameters as displayed in the Dynamic Address Table pages.
Table 11-2. Dynamic Address CLI Commands
CLI Command Description
mac address-table aging-time
seconds
no mac address-table aging-time
Sets the aging time of the
address table.
Use the no form of this
command to restore the default.
clear mac address-table dynamic
[interface
[{[gigabitethernet|tengigabitether
net] port-number|port-channel LAG-
number}} [permanent|delete-on-
reset|delete-on-timeout|secure]]
clear mac address-table secure
interface
[gigabitethernet|tengigabitetherne
t] port-number|port-channel LAG-
number
Removes learned or secure
entries from the forwarding
database.
show mac address-table
[dynamic|static|secure] [vlan
vlan] [interface
[gigabitethernet|tengigabitetherne
t] port-number|port-channel LAG-
number] [address mac-address]
Displays entries in the MAC
address table.