Users Guide

Dell PowerConnect 55xx Systems User Guide 427
Defining GARP Timers Using CLI Commands
This table summarizes the CLI commands for defining GARP timers as
displayed in the GARP Timers pages.
The following is an example of the CLI commands:
Table 12-1. GARP Timer CLI Commands
CLI Command Description
garp timer {join|leave|leaveall}
timer_value
Adjusts the GARP application join,
leave, and leaveall GARP timer val-
ues.
show gvrp configuration
[[gigabitethernet|tengigabitether
net]port-number|vlan vlan-
id|port-channel LAG-number]
Displays GVRP configuration infor-
mation, including timer values,
whether GVRP and dynamic VLAN
creation are enabled, and which ports
are running GVRP.
console(config)# interface gi1/0/1
console(config-if)# garp timer leave 900
console(config-if)# end
console# show gvrp configuration gi1/0/11
GVRP Feature is currently Disabled on the device.
Maximum VLANs: 223
Port(s) GVRP Registration Dynamic VLAN Timers (milliseconds)
Status Creation Join Leave Leave All
---------
-------- ------- ------------ ----------- ------ -----
gi1/0/11 Disabled Normal Enabled 200 900 10000