Users Guide

434 Dell PowerConnect 55xx Systems User Guide
spanning-tree pathcost method
{long|short}
no spanning-tree pathcost
method
Sets the default path cost method.
Use the no form of this command to return
to the default configuration.
spanning-tree priority
priority
no
spanning-tree priority
Configures the spanning tree priority.
Use the no form of this command to
restore the default device spanning-tree
priority.
spanning-tree hello-time
seconds
no spanning-tree hello-time
Configures the spanning tree bridge Hello
Time, which is how often the device
Broadcasts Hello messages to other
devices.
Use the no form of this command to
restore the default configuration.
spanning-tree max-age
seconds
no spanning-tree max-age
seconds
Configures the spanning tree bridge
maximum age.
Use the no form of this command to
restore the default configuration
spanning-tree forward-time
seconds
no spanning-tree forward-time
Configures the spanning tree bridge
forward time, which is the amount of time
a port remains in the listening and learning
states before entering the forwarding state.
Use the no form of this command to
restore the default configuration.
show spanning-tree
[[gigabitethernet|tengigabite
thernet] port-number|port-
channel LAG-number] [instance
instance-id]
Displays spanning tree configuration.
show spanning-tree [detail]
[active|blockedports]
[instance instance-id]
Displays detailed spanning tree
information on active or blocked ports.
show spanning-tree mst-
configuration
Displays spanning tree MST configuration
identifier.
Table 13-1. STP Global Parameter CLI Commands (Continued)
CLI Command Description