Users Guide

Dell PowerConnect 55xx Systems User Guide 455
– Root Port — Root port of the selected instance.
–
Root Path Cost — Root path cost of the selected instance.
–
Bridge ID — Bridge priority and the MAC address of this switch for
the selected instance.
–
Remaining Hops — Number of hops remaining to the next
destination.
Configuring MSTP Instances Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the MSTP Instance pages.
The following is an example of the CLI commands:
Table 13-6. Configuring MSTP Instances CLI Commands
CLI Command Description
spanning-tree mst
configuration
Enters MST Configuration mode.
spanning-tree mst
instance-id priority
priority
no spanning-tree mst
instance-id priority
Configures the device priority for the specified
spanning-tree instance.
Use the no form of this command to restore
the default configuration.
show spanning-tree
detail
Displays the spanning-tree configuration
console(config)# spanning-tree mst configuration
console(config-mst)# spanning-tree mst 1 priority 4096