Users Guide

Dell PowerConnect 55xx Systems User Guide 471
switchport access vlan {vlan-
id|none}
no switchport access vlan
Configures the VLAN ID when
the interface is in access mode.
Use the no form of this command
to restore the default
configuration.
switchport trunk allowed vlan
{all|none|add vlan-list|remove
vlan-list|except vlan-list}
no switchport trunk allowed vlan
Sets the trunk characteristics
when the interface is in Trunking
mode.
Use the no form of this command
to reset a trunking characteristic
to the default.
switchport trunk native vlan {vlan-
id|none}
no switchport trunk native vlan
Defines the native VLAN when
the interface is in trunk mode.
Use the no form of this command
to restore the default
configuration.
switchport general allowed vlan
{add|remove} vlan-list
[tagged|untagged]
no switchport general allowed vlan
Sets the general characteristics
when the interface is in general
mode.
Use the no form of this command
to reset a general characteristic to
the default.
switchport general pvid vlan-id
no switchport general pvid
Configures the PVID when the
interface is in general mode.
Use the no form of this command
to restore the default
configuration.
switchport customer vlan vlan-id
no switchport customer vlan
Sets the port's VLAN when the
interface is in customer mode.
Use the no form of this command
to restore the default
configuration.
Table 14-2. Port-to-VLAN Group Assignments CLI Commands (Continued)
CLI Command Description