Users Guide

Dell PowerConnect 55xx Systems User Guide 539
Configuring LLDP Port Settings Using CLI Commands
The following commands are used to configure LLDP on ports.
The following is an example of the CLI commands:
Table 17-2. LLDP Port Settings CLI Commands
CLI Command Description
lldp transmit
no lldp transmit
Enables transmitting LLDP on an
interface.
Use the no form of this command to stop
transmitting LLDP on an interface.
lldp receive
no lldp receive
Enables receiving LLDP on an interface.
Use the no form of this command to stop
receiving LLDP on an interface.
lldp optional-tlv tlv1 [tlv2
… tlv5]
Specifies which optional TLVs
from the basic set should be
transmitted
console(config)# interface gi1/0/1
console(config-if)# lldp transmit
console(config-if)# lldp receive
console(config-if)# lldp optional-tlv port-desc