Users Guide

580 Dell PowerConnect 55xx Systems User Guide
Configuring Option 82 Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the Option 82 page.
The following is an example of the CLI command:
Global Settings
To set the DHCP Relay global settings:
1
Click Switching > DHCP Relay > Global Settings in the tree view to
display the
Global Settings: Summary page.
Figure 19-6. Global Settings: Summary
The currently-define DHCP servers are displayed.
2 Enable/disable DHCP relay.
Table 19-6. CLI Option 82 Commands
CLI Command Description
ip dhcp information option
no ip dhcp information option
Enables DHCP option-82 data insertion.
Use the no form of this command to
disable DHCP option-82 data insertion.
console(config)# ip dhcp information option