Users Guide

594 Dell PowerConnect 55xx Systems User Guide
– Initiators/Targets — The IP address and TCP port used by each
initiator and target in the session is displayed.
Displaying iSCSI Sessions Using CLI Commands
The following table summarizes the CLI commands for displaying iSCSI
sessions.
The following is an example of the CLI commands:
Table 20-3. iSCSI CLI Commands
CLI Command Description
show iscsi sessions
[detailed]
Displays iSCSI sessions
console(config)# show iscsi sessions
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
-------------------------------------------------------------
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
ISID: 11
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
ISID: 222
--------------------------------------------------------------
Target: iqn.103-1.com.storage-vendor:sn.43338.storage.tape:sys1.xyz
--------------------------------------------------------------
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
ISID: 44
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
ISID: 65
--------------------------------------------------------------
console# show iscsi sessions detailed
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
--------------------------------------------------------------
Session 1:
---------
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12.storage:sys1.xyz
UP Time: 02:10:45 (DD:HH:MM)
Time for aging out: 10 min
ISID: 11
Initiator IP Address Initiator TCP Port Target IP Address Target IP Port
-------------------- ----------------- ---------------- -------------
172.16.1.3 49154 172.16.1.20 3001
172.16.1.3 49154 172.16.1.20 3001
1172.16.1.3 49154 172.16.1.20 3001
30001Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
Status: Active
UP Time: 00:04:50 (DD:HH:MM)
Time for aging out: 2 min
ISID: 22