Users Guide

Dell PowerConnect 55xx Systems User Guide 613
– Start Frames Receive — The number of EAPOL Start frames received
on the port.
–
Log off Frames Receive — The number of EAPOL Logoff frames
received on the port.
–
Respond ID Frames Receive — The number of EAP Resp/ID frames
received on the port.
–
Respond Frames Receive — The number of valid EAP Response
frames received on the port.
–
Request ID Frames Transmit — The number of EAP Req/ID frames
transmitted via the port.
–
Request Frames Transmitted — The number of EAP Request frames
transmitted via the port.
–
Invalid Frames Receive — The number of unrecognized EAPOL
frames received on this port.
–
Length Error Frames Receive — The number of EAPOL frames with
an invalid Packet Body Length received on this port.
–
Last Frame Version — The protocol version number attached to the
most recently received EAPOL frame.
–
Last Frame Source — The source MAC address attached to the most
recently received EAPOL frame.
3 Select one of the Refresh Rate options to specify how frequently the
statistics should be refreshed.
Viewing EAP Statistics Using the CLI Commands
The following table summarizes the CLI commands for viewing EAP
statistics.
Table 21-4. EAP Statistics CLI Commands
CLI Command Description
show dot1x statistics Displays 802.1X statistics for the
specified interface.