CLI Transition Guide for Dell™ PowerConnect™ 5500 Series Switches A Dell Technical White Paper www.dell.com │ support.dell.
CLI Transition guide for Dell PowerConnect 5500 Series Switches THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND. © 2011 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Contents Introduction ................................................................................................................ 2 Changes to the Interface Naming Conventions ....................................................................... 2 VLAN Enhancements ...................................................................................................... 2 Shadow VLAN Configuration ...........................................
CLI Transition guide for Dell PowerConnect 5500 Series Switches Introduction The Dell™ PowerConnect™ 5500 Series Systems CLI Transition Guide White Paper outlines the changes in the CLI commands from the PowerConnect 54XX and 35XX software to the 4.x software release on the 5500 Series switches. Changes include syntax and functional updates as specified in the following sections.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Enhanced functionality in Trunk mode On the Dell PowerConnect 5500, ports set to Trunk mode now carries all VLANs (by default) that are created and active on the device, and an inactive member of VLANs that were not created. The port PVID (native VLAN) can be configured to a VLAN that does not exist on the device. Untagged frames will be classified to the VLAN whose VID is configured as the port’s PVID.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Updated Commands – Operational Modifications Table 1 shows the list of commands with updated syntax for normal switch operation. Table 1.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation Comments ARP arp timeout seconds arp timeout seconds In the revised implementation, the command is supported in both Global Configuration Mode and Interface Configuration Mode, while previous implementation supported only Global Configuration Mode. VLAN vlan vlan-id name vlan vlan-id [media ethernet] [name vlanname] [state active] [stp type ieee] 1.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Updated Commands – Command Mode Modifications Table 2 shows the list of commands with updated syntax for command mode switch operation. Table 2.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation Comments IGMP Snooping ip igmp snooping forbidden mrouter ports {add | delete} {ethernet interface-list | portchannel port-channelnumber-list} ip igmp snooping vlan vlan-id forbidden mrouter ports interface-range-list no ip igmp snooping vlan vlan-id forbidden mrouter ports [interface-rangelist] 1.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Updated Commands – Syntax Modifications Table 3 shows the list of commands with updated syntax modifications. Table 3. Updated Commands with Syntax Modifications Feature Previous Implementation Dell PowerConnect 5500 Implementation 802.1x dot1x timeout re-authperiod seconds dot1x timeout reauth-period seconds 802.1x dot1x re-authentication dot1x reauthentication 802.
CLI Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation clock summer-time zone recurring {usa | eu | {week day month hh:mm week day month hh:mm}} [offset] Clock commands clock summer-time [usa|eu] recurring | date zone clock summer-time zone date date month year hh:mm date month year hh:mm [offset] clock summer-time zone date month date year hh:mm month date year hh:mm [offset] Ethernet configuration clear counters [ethern
CLI Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation Web server ip http exec-timeout minutes [seconds] ip http timeout-policy idle seconds Web server ip http authentication method1 [method2...] ip http authentication aaa login-authentication method1 [method2...
CLI Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation SNMP snmp-server community community [ro | rw | su] [ipv4-address| ipv6-address] [view view-name] snmp-server community community [view view-name] [ro | rw | su] [ipv4 address | ipv6 address] [access-listnumber] snmp-server communitygroup community groupname [ipv4-address| ipv6address] SNMP snmp-server user username groupname [remote engineid-string ] [ auth-md5 passw
CLI Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation Syslog logging {ipv4-address | ipv6address | hostname} [port port] [severity level] [facility facility] [description text] logging host {ipv4-address | ipv6-address | hostname} [port port] [severity level] [facility facility] [description text] System Management ping ip-address | hostname [size packet_size] [count packet_count] [timeout time_out] ping ip {ipv4-addres
CLI Transition guide for Dell PowerConnect 5500 Series Switches Dell PowerConnect 5500 Implementation Feature Previous Implementation System Management show power inline [ethernet interface-id ] show power inline powerconsumption [ethernet interface-id ] show power inline [[interfaceid | consumption ] | module switch-number] System Management show copper-ports tdr [ interface ] show cable-diagnostics tdr interface interface-id System Management show stack [ unit unit ] show switch [stack-membern