Technical White Paper
Table Of Contents
- A Dell Technical White Paper
- www.dell.com │ support.dell.com
- Introduction
- Changes to the Interface Naming Conventions
- VLAN Enhancements
- Enhancement to IGMP Snooping
- Additional ACL Options
- Modification in Power-Over-Ethernet
- Enhancement to Stack Configuration
- Enhancement to QoS Ingress Rate Limit
- Updated Commands – Operational Modifications
- Updated Commands – Command Mode Modifications
- Updated Commands – Syntax Modifications
- Summary
CLI Transition guide for Dell PowerConnect 5500 Series Switches
Page 13
Feature Previous Implementation
Dell PowerConnect 5500
Implementation
System
Management
show power inline [ethernet
interface-id ]
show power inline power-
consumption [ethernet
interface-id ]
show power inline [[interface-
id | consumption ] | module
switch-number]
System
Management
show copper-ports tdr [
interface ]
show cable-diagnostics tdr
interface interface-id
System
Management
show stack [ unit unit ]
show switch [stack-member-
number]
IGMP Snooping
ip igmp snooping forbidden
mrouter ports {add | delete}
{ethernet interface-list |
port-channel port-channel-
number-list}
ip igmp snooping vlan vlan-id
forbidden mrouter ports
interface-range-list
no ip igmp snooping vlan vlan-
id forbidden mrouter ports
[interface-range-list]
Summary
For more information, consult the Dell PowerConnect 5500 CLI Guide available at
http://support.Dell.com.