Technical White Paper

CLI Transition guide for Dell PowerConnect 5500 Series Switches
Page 4
Updated Commands – Operational Modifications
Table 1 shows the list of commands with updated syntax for normal switch operation.
Table 1. Updated Commands with Operational Modifications
Feature Previous Implementation
Dell PowerConnect 5500
Implementation
Comments
ACL {deny | permit } {any|
protocol} {any | source
source-wildcard}
{any|{destination
destination-wildcard}}
[dscp number | ip-
precedence number]
{deny | permit } {ip |
protocol } {any | source
source-wildcard} {any |
destination destination-
wildcard} [dscp number |
precedence number]
[time-range time-range-
name]
1. The command syntax was
modified
2. See also description in
previous chapter.
Address
Table
clear bridge
clear mac-addresses
{ethernet interface |
port-channel port-
channel-number}
clear mac address-table
dynamic [ interface
interface-id]
The command syntax was
modified. The revised
command aggregates two
commands in the former
implementation
IGMP
Snooping
ip igmp snooping host-
time-out
ip igmp snooping mrouter-
time-out
ip igmp snooping leave-
time-out
ip igmp robustness
ip igmp query-interval
ip igmp query-max-
response-time
ip igmp last-member-
query-count
ip igmp last-member-
query-interval
1. See description in previous
chapter.
2. The transformation to the
new implementation is as
follows under the “interface
VLAN” configuration:
RouterTimeOut = Robustness *
QueryInterval
HostTimeOut = RouterTimeOut
+ QueryMaxResponseTime
LeaveTimeOut =
LastMemberQueryCount *
LastMemberQueryInterval
Interface
Configuration
interface ethernet
interface
interface range ethernet {
port-range | all }
interface port-channel
port-channel-number
interface interface-id
interface {port-range-list
| all}
1. The command syntax was
modified
2. See also description in
previous chapter.