Technical White Paper
Table Of Contents
- A Dell Technical White Paper
- www.dell.com │ support.dell.com
- Introduction
- Changes to the Interface Naming Conventions
- VLAN Enhancements
- Enhancement to IGMP Snooping
- Additional ACL Options
- Modification in Power-Over-Ethernet
- Enhancement to Stack Configuration
- Enhancement to QoS Ingress Rate Limit
- Updated Commands – Operational Modifications
- Updated Commands – Command Mode Modifications
- Updated Commands – Syntax Modifications
- Summary
CLI Transition guide for Dell PowerConnect 5500 Series Switches
Page 7
Feature Previous Implementation
Dell PowerConnect 5500
Implementation
Comments
IGMP
Snooping
ip igmp snooping
forbidden mrouter ports
{add | delete} {ethernet
interface-list | port-
channel port-channel-
number-list}
ip igmp snooping vlan
vlan-id forbidden mrouter
ports interface-range-list
no ip igmp snooping vlan
vlan-id forbidden mrouter
ports [interface-range-
list]
1. In Dell PowerConnect 5500,
the command was modified
from VLAN Interface
Configuration Mode command
to Global Configuration Mode
command that includes the
VLAN ID as a parameter
2. The command syntax was
modified
IGMP
Snooping
ip igmp snooping
multicast-tv vlan vlan-id
{add | remove} ip-
multicast-address [count
number]
ip igmp snooping vlan
vlan-id multicast-tv ip-
multicast-address [count
number]
no ip igmp snooping vlan
vlan-id multicast-tv [ip-
multicast-address [count
number]]
1. In Dell PowerConnect 5500,
the command was modified
from VLAN Interface
Configuration Mode command
to Global Configuration Mode
command that includes the
VLAN ID as a parameter
2. The command syntax was
modified
IGMP
Snooping
ip igmp snooping querier
enable
ip igmp snooping vlan
vlan-id querier
no ip igmp snooping vlan
vlan-id querier
1. In Dell PowerConnect 5500,
the command was modified
from VLAN Interface
Configuration Mode command
to Global Configuration Mode
command that includes the
VLAN ID as a parameter
2. The command syntax was
modified