Owner's Manual

106 Clock
www.dell.com | support.dell.com
sntp client poll timer
The sntp client poll timer global configuration command sets the polling time for the Simple
Network Time Protocol (SNTP) client. To return to default, use the
no form of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
• seconds — Polling interval in seconds (Range: 60-86400)
Default Configuration
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client
to 120 seconds.
sntp broadcast client enable
The sntp broadcast client enable global configuration command enables Simple Network Time
Protocol (SNTP) Broadcast clients. To disable SNTP Broadcast clients, use the
no form of this
command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
SNTP Broadcast clients are disabled.
Command Mode
Global Configuration mode
Console(config)# sntp client poll timer 120