Owner's Manual

Clock 107
User Guidelines
Use the sntp client enable interface configuration command to enable SNTP clients on a
specific interface.
Examples
The following example enables Broadcast clients.
sntp anycast client enable
The sntp anycast client enable global configuration command enables Simple Network Time
Protocol (SNTP) Anycast clients. To disable SNTP Anycast clients, use the
no form of this
command.
Syntax
sntp anycast client enable
no sntp anycast client enable
Default Configuration
SNTP Anycast clients are disabled.
Command Mode
Global Configuration mode
User Guidelines
Polling time is determined by the sntp client poll timer global configuration command.
Use the
sntp client enable interface configuration command to enable SNTP clients on a
specific interface.
Examples
The following example enables Anycast clients.
sntp client enable
The sntp client enable interface configuration command enables Simple Network Time Protocol
(SNTP) Broadcast and Anycast clients on an interface. To disable the SNTP client, use the
no form
of this command.
Console(config)# sntp broadcast client enable
Console(config)# sntp anycast client enable